[PRE-ORDER] 8-in-1 Open Source Cartridge Reader, Type-C, Fully Assembled

This is a pre-order! Orders are part of batch #3. The earliest estimated ship date is sometime in late January or early to mid February.
This early pricing is likely higher than the final pricing. Early orders should be considered partial donations to fund/support development. Expect a price drop, do not expect a partial refund!
This hardware revision is still under R&D, delays are more likely than usual. Do not order if you can't wait!
Click here for details.

Be able to read cartridges for over 8 systems with the Open Source Cartridge Reader!

• Compatible with cartridges from:
  • NES
  • Famicom
  • SNES/Super Famicom
  • N64
  • Genesis/Megadrive
  • Master System
  • GB/GBC/GBA
  • Game Gear
• Can dump ROMs and read/write saves for most cartridges from the above systems and more (i.e., WonderSwan) via third-party adapters.
• The N64 controller port can test N64 controllers and read/write memory packs.
• All optional add-ons are included!
• Automatic voltage selection
  • Firmware selects the voltage, no need to manually select cartridge voltage or worry about having the wrong voltage setting.
• Real-Time Clock (RTC)
  • Adds creation timestamps to the files on the SD card. This is helpful if you are dumping the same game many times.
• Nichicon polymer main/bulk capacitor (PLS-series main cap).
• Open-source hardware and software, powered by an Arduino Mega, updates via GitHub.
• Ships with the latest firmware
• A 32GB SD card preloaded with the required files is included. Brand varies but will be a reputable brand, such as SanDisk, Samsung, etc.
• Every reader is hand-tested with at least 1 game from each supported console.
• 1 year of coverage under the Best-Effort Service Policy.
• The pictured games, USB adapter, and controller are for demonstration purposes only and are not included.
• Requires USB power via a Type-C connector, which is not included. 500mA or higher is recommended. Can also be powered from most computers' USB ports using a USB Type-C cable.

Included in the box:

• OSCR Hardware 5
  • Mainboard (Revision 6-SMT)
    • The clock signal generator is built into the mainboard.
  • Seven-Slot Adapter (Revision 5) (8th slot is on the main board)
    • The PIC12F629 is built into the adapter.
• 32GB SD Card

Not included:

• USB C cable
• Power supply (500mA or higher)
• Any games, controllers, etc.

Legal Disclaimers

• StarshadeRETRO is not endorsed by Sanni (creator of the OSCR). This website is not under the control of Sanni. You should not contact Sanni with issues related to StarshadeRETRO.
• SEGA, Genesis, Master System, and Game Gear are registered trademarks of SEGA GAMES CO., LTD.
• NES, SNES, Game Boy, Game Boy Advance, and N64 are registered trademarks of Nintendo of America Inc.
• StarshadeRETRO is not sponsored, endorsed, or approved by SEGA or Nintendo. The use of their marks is to demonstrate compatibility and is not meant as an endorsement.